Industry trends >>>
Contact Us >>>
Laizhou Huizhong Auto Parts Co., Ltd
Tel：
Phone：
E-mail：
E-mail：
Address：Yanying Industrial Park, Pinglidian Town, Laizhou City, Yantai, Shandong Province
Zhonghui brake disc: whether to clean the car air filter depends on the indicator light
date：2017-05-03 ??? ? visits: 39
The air filter plays a role in filtering and protecting the air inside the car. However, the majority of car owners may not have a clear understanding of when to replace the air filter or clean the air filter. However, Xiaobian suggested that the simplest way is to check the warning light prompt. Now the company mainly produces and processes brake discs of various large passenger cars and heavy trucks. It can be processed and customized according to different requirements of customers. Brake disc and brake disc washer products are exported to domestic and foreign markets, and are highly praised by customers.
1）Clean the air filter element
Loosen the filter catch, remove the nut fixing the filter element, remove the cover and pull out the filter element. Take out the filter element and pay attention to prevent impurities from falling into the carburetor. Wipe the inside and outside of the air cleaner housing with a rag dipped with gasoline
Check the pollution degree of the filter element and clean it. When the filter element is stored as dry dust, compressed air with a pressure not higher than 500KPa can be used to blow the dust on the inner and outer surfaces of the filter element from the inside of the filter element up and down evenly along the bevel direction. If there is no compressed air, gently tap the filter element with the handle of a screwdriver, and then brush the external dirt with a brush.
During operation, do not use strong blows or. Collision with filter element. If the filter element is damaged during cleaning, replace the filter element. The paper filter element in normal use shall be replaced at specified intervals.
2）Check and clean the dry filter element
Turn on the light and put it inside the filter element to observe whether there is any damage, small hole or thinning part from the outside, and check whether the rubber gasket is damaged. In case of any abnormality, replace the filter element and gasket.
3）Replace the filter element of the air cleaner
Replace according to the regulations of each model. When replacing the filter element, pay attention to check whether the new filter element is damaged and whether the gasket is damaged. If any defect is found, it should be matched.
4）Install the air cleaner.
After cleaning the filter element, install the components in the reverse order of removal. The filter element must be installed reliably. It is not allowed to touch the paper part of the filter element with hands or tools. Especially, it is not allowed to pollute the filter element with oil.
Under normal road conditions, the air filter must be cleaned and maintained when the vehicle travels 7500-8000km. The maintenance interval should be shortened in areas with large sand and dust levels.
Dry air filter and dry air filter are widely used in new cars. Now the company mainly produces and processes brake discs of various large passenger cars and heavy trucks. It can be processed and customized according to different requirements of customers. Brake disc and brake disc washer products are exported to domestic and foreign markets, and are highly praised by customers. The filter element is made of resin treated microporous filter paper, which has the characteristics of good filtering effect and convenient maintenance. Due to different models, their structure and shape are different, but their maintenance methods are basically the same. The maintenance shall be carried out according to the service mileage specified by the automobile manufacturer.
